SN95 GT500 Brembo Brake Kit

SN95 GT500 Brembo Brake Kit

Announcing our GT500 Brake Kit!
This kit includes the necessary hardware to mount 4 piston GT500-spec brake calipers to 94-04 Mustang spindles.

Kit contents:
2x Adapter brackets
2x Sets of hardware
2x 0.75" custom wheel spacers

**Calipers must be purchased separately**

Note: Current bracket design differs from photo, the bracket is now black zinc plated.

INSTALLATION PROCEDURE:




NOTES:

A set of 3/4 inch custom spacers (included) are required to use this kit. This will add to your wheel's offset, so plan accordingly.

ARP extended studs are required for installation. If you do not already have the extended studs, you will need to either buy them through us of through a third party for proper fitment.

Our brake kits are intended only for race use.

This kit requires the use of 18" wheels. Since wheels vary from brand to brand, we cannot guarantee fitment for any specific set of wheels. Based on Ford's specifications listed here, the Ford Racing M-1007-S1895 and M-1007-S1895B 18" wheels, or equivalent, have been verified to work.



Our kit includes the necessary adapter bracket, spacer, and hardware, but not the calipers, rotors, lines, or pads. You will need to source the following:

S197 4-piston Brembo calipers, GT500 or Track Pack

S197 (2007-2012 GT500 or 2012-2013 Boss 302) 13.97" brake rotors

SN95 Cobra or stainless steel brake lines, Available Here

Please look at our current lead times for information on shipping latency, if you need your order sooner please call us at (916) 467-9319